Excavators

  • ES10 ZT Excavator

    Like the big machines, only smaller.

    The new zero tail type design combined with the pull down canopy means that the ES10 ZT excavator is your best ally in all situations: from small indoor demolition work to outdoor building and gardening applications. Its extremely compact size allow it to pass through narrow spots and to be used in tight spaces where other machines cannot access. Despite the low operating weight, the ES 10 ZT is very stable thanks to its expanding undercarriage. 

  • ES18 ZT Excavator

    The extremely compact dimensions make the ES 18 ZT (zero tail with enlarged carriage) your best ally for all your working needs both indoors and outdoors. The undercarriage and blade can be widened from 990 mm to 1300 mm, ensuring greater stability and thus complete operating mobility. This model can be equipped with four upright roll-bar protection or cab.  The choice allows unmatched versatility: minimum footprint for maximum performance.

  • ES25 ZT Excavator

    The extremely compact dimensions make the ES 25 ZT (zero tail) your best ally to satisfy all your working needs. The ES 25 ZT can rotate inside its own track width, even when the cab door is open. With the rear zero tail, the operator does not need to check the manoeuvring space during excavation operations. This model can be equipped with four upright roll-bar protection or cab, allowing unmatched versatility: minimum footprint for maximum performance.
    The heart of this excavator is the efficient YANMAR 3TNV76 engine designed and built to optimize performance and reduce fuel consumption. The compact size and overall weight below 25 quintals make the machine suitable for loading on a trailer, making it possible to transport a complete range of equipment and accessories.

  • ES35.2 ZT Excavator

    KUBOTA 1400 cc 33.4 HP DIESEL engine - water cooled.
    Cab with heating and ventilation.
    Servo assisted hydraulic joysticks with electro-hydraulic proportional controls for:
    - swing;
    - single/double effect hydraulic system (e.g. hammer or drill).
    Single/double effect hydraulic system hose kit.
    Double speed transmission.
    Dozer blade.

  • ES50 ZT Excavator

    KUBOTA 2.615 cc 46,0 HP DIESEL engine - water cooled.
    Tilting cabin for maintenance with heating and ventilation.
    Onboard computer with multifunction display (diagnostics, machine emergency).
    Auto idle (automatic deceleration).
    Hydraulic system Load Sensing with "Flow Sharing" dispenser.
    Servo assisted hydraulic joysticks with electro-hydraulic proportional controls for:
    – boom swing;
    – hydraulic flow AUX 1 simple/double effect, priority flow max 70 / 70 lt/min with electrical latching and max pressure 200 bar (ex. hammer, auger, cutter and mulcher).
    Dual travel-speed with "AUTO TWO SPEED".
    Dozer blade.

  • ES57 ZT Excavator

    KUBOTA 2615 cc 46,0 Hp DIESEL engine - water cooled.
    Tilt cab complete with air conditioner and stereo system.
    Onboard computer with multifunction display (diagnostics, machine emergency).
    Auto idle (automatic deceleration).
    Servo assisted hydraulic joysticks with electro-hydraulic proportional controls for:
    - swing;
    - single/double acting hydraulic system hose kit (e.g. hammer or auger);
    - high yield hydraulic system, 70 l/min at 200 bar max for cutters and cutters and cutting heads;
    - low yield double effect hydraulic system (e.g. directional bucket);
    - double effect hydraulic system with 3-way deviator (e.g. grapple with rotor).
    Dual travel-speed with “AUTO TWO SPEED”.
    Electronically controlled diesel filling pump.
    Dozer blade.

  • ES85 ZT Excavator

    YANMAR 3319 cc 63.2 HP DIESEL engine - water cooled.
    Cab complete with air conditioner and stereo system.
    Onboard computer with multifunction display (diagnostics, machine emergency).
    GEO-SERVICE AM50 - satellite device with tracking, service and remote diagnostics fuctions.
    Auto idle (automatic deceleration).
    Servo assisted hydraulic joysticks with electro-hydraulic proportional controls for:
    - swing
    - single/double effect hydraulic system (ex. hammer or drill)
    - high yield hydraulic system, 100 l/min at 200 bar max for cutters and cutting heads
    - low yield double effect hydraulic system (ex. directional bucket)
    - double effect hydraulic system with 3-way deviator (ex. grapple with rotor).
    Double speed transmission with “AUTO TWO SPEED”.
    Electronically controlled diesel filling pump.
    Dozer blade.